Fenix LDTS - Manual (Page 14)

14
3. Accelerating the warming of heating floors
a) For heating mat laid in a concrete layer

Wait at least 4–6 weeks after installation before putting the mat into operation, so that the concrete
will be set fully.

On the first day, set the temperature of the floor to be the same as the temperature in the room
(maximum 18°C).
 In the following days, increase the temperature in increments of 2°C per day up to 28°C.
 Maintain the temperature of 28°C for three days.

Then, decrease the temperature of the floor by 5°C per day until you reach the initial temperature.

Afterwards, you can set the desired temperature and put the floor into normal operation.
b) For heating mat laid into self-leveling material and into adhesive
sealing cement

We recommend putting the mat into operation after 5 days from laying the final layer of the floor
(floor covering).
Note: The values mentioned above are for information only, it is necessary to follow the instructions
provided by the manufacturer of the respective construction material.
4. Warranty, claims
ECOFLOOR, supplier of the cable circuits, provides a warranty period of 10 years for the product’s
functionality, beginning from the date of its installation that is confirmed in the certificate of warranty
(installation must be made at latest within 6 months from the date of purchase), provided that:

a certificate of warranty and proof of purchase are submitted,

the procedure described in this user guide has been followed,

data on laying and connecting the cable in the floor and the resulting measured values of the insulation
resistance of the heating cable are provided, and

the procedure for applying the sealing cement specified by its producer has been followed.
Claims may be made in writing at the company that performed the installation, or directly to the
manufacturer.
The claims procedure also is available at the website: http://www.fenixgroup.eu
Fenix s.r.o. Fenix Trading s.r.o.
Jaroslava Ježka 1338/18a, 790 01 Jeseník Slezská 2, 790 01 Jeseník
tel.: +420 584 495 442, fax: +420 584 495 431 tel.: +420 584 495 304, fax: +420 584 495 303
e-mail: [email protected] , http://www.fenixgroup.cz e-mail: [email protected] , http://www.fenixgroup.cz