Adding a user – Exacq exacqVision E-Series User Manual User Manual
Page 61
61
Adding a User
To add a user, complete the following steps:
1.
Click Add (not shown) to enter the Add User interface.
2.
Input the User Name and Password, and confirm the password.
3.
Select the Level (Operator or User).
Operator: Two-way Audio in Configuration and all operating permission in Camera Configuration.
User: Only the local/remote playback in the Camera Configuration.
4.
On the Basic Permission tab, select Local Configuration and Remote Configuration permissions for the user.
5.
On the Camera Configuration tab, select channels for which the user has permission to use each feature.
6.
Use the arrows to display or hide the channel numbers.
7.
Click OK to finish the user addition.
2
2
3
2
4a
4b
5
2
6
2
7
This manual is related to the following products: