Configuring video tampering – Exacq exacqVision E-Series User Manual User Manual
Page 51
![background image](https://www.manualsdir.com/files/783397/content/doc051.png)
51
Configuring Video Tampering
To configure video tampering, complete the following steps:
1. From the Remote Configuration menu, select Camera Settings and then Video Tampering to open the
Video Tampering interface.
2. Select the Channel for which to configure the tamper-proof detection alarm.
3. Select the Enable Video Tampering checkbox.
4. Draw the tampering area.
5. On the Arming Schedule tab, Click Edit to edit the arming schedule for tampering. The arming schedule
configuration is the same as for the Arming Schedule for Motion Detection.
6. Select the Linkage Method tab to set the actions taken for the tampering alarm.
7. Click Save to save the settings.
2
2
3
2
4
2
6
2
1
2
5
2
7
2
This manual is related to the following products: