Exacq exacqVision E-Series User Manual - Manual (Page 13)

13 www.exacq.com
Modifying Network Parameters
1. Select the device to be modified in the device list.
2. Network parameters of the selected device are displayed in the Modify Network Parameters panel. Edit the
modifiable network parameters as needed.
3. Enter the password of the admin account of the device in the Password field and click to save the
changes.
NOTE: To modify the network parameters of multiple devices simultaneously, select all the devices to be
modified before editing the parameters. The IP address entered is incremented by one for the additional
selected devices; that is, if you enter 10.13.6.43 for the first selected device, the next device will be assigned
10.13.6.44, and so on until each selected device is assigned an address.
Restoring Default Password
It is recommended that you change the admin password. Default credentials for the encoder are as follows:

Username: admin

Password: admin256
1
2
3