Exacq exacqVision Edge/IQeye Quick Start Guide - Manual

exacqVision Edge/IQeye Quick Start Guide
www.e x acq.com
Page 1 of 5
10/17/2014
Introduction
exacqVision Edge is a variation of the standard exacqVision Server application that operates on a compatible IQeye camera. It can
record video from the local camera directly to the SD memory card in the camera and can archive the recorded data to remote
drives. The exacqVision Client application can connect to any combination of Edge and standard servers simultaneously.
Requirements

A one-channel license from Exacq Technologies must be obtained for each Edge-enabled camera. (A standard Edge license
part number is EDGE, and an Edge Plus license part number is EDGEP.)

exacqVision Edge is compatible with IQeye IQA3xx, IQ76xx, IQD5xx, and IQM5xx families of cameras.

IQinVision recommends running current firmware:

IQA3xx and IQ76xx cameras must be running version 3.4/6 firmware or later.

IQD5xx and IQM5xx cameras must be running firmware version 3.6/6 or later.
NOTE: Please see http://www.iqeye.com/support/technical-downloads/firmware-downloads for currently released IQeye
firmware.

A micro-SDHC class 10 or better SD memory card no larger than 32GB, purchased separately, is required for each camera.
NOTE: Up to 2GB is reserved for exacqVision Edge operations and cannot be used for exacqVision Edge data storage.

A separate web server computer running the exacqVision Web Service application is required for mobile or web clients
connecting to Edge servers.