Exacq exacqVision E-Series User Manual - Manual (Page 10)

10 www.exacq.com
E-ADE4C REAR PANEL
Item Description
1 ALARM IN Relay alarm input.
2 ALARM OUT Relay alarm output.
3 RS-232 Serial interface for configuration of device’s parameters; or used as
transparent channel.
4 RS-485 RS-485 serial interface; connect to pan/tilt unit, speed dome, etc.
5 RESET Hold button for more than 15 seconds after the device is turned on to
restore factory-default settings.
6 microSD Unused (included for future expansion).
7 LAN 10M/100Mbps adaptive Ethernet interface (PoE). Right LED indicator
lights in green when the network cable is connected; left LED indicator
blinks in orange when data is transmitting/receiving.
8 DC12V 12V DC power supply.
9 GND Grounding.
1
2
3
4
5 6 7 8 9