Recording tab – Exacq exacqVision Pro User Manual User Manual
Page 36
36
Recording Tab
NOTE: The following settings on the Camera Settings page are not available on RTSP interfaces, and they vary on ONVIF
and certain proprietary interfaces.
1. Select Enable to record video from the camera based on the configured schedule.
2. The Quality slider allows you to modify the image quality by increasing or decreasing its size. Decreasing image
quality saves disk space by reducing the size of the video as it is recorded.
3. The Format setting allows you to select the compression format.
4. The resolution setting allows you to select the size of the video.
5. The Image Rate setting allows you to select the number of images recorded per second from the camera.
6. Click Apply to enable changes, or Apply Defaults to revert to the factory default settings.
1
2
3
4
5
6