Exacq exacqVision IP Camera Quick Start Guide - Manual (Page 9)

www.exacq.com
#500-0024
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 9 of 17
7/15/2014
To change the IP address of the selected camera, select Static in the Network area. Enter the IP address and default gateway,
and then click Set IP Address.
NOTE: The factory default login for Ganz devices is:

username: admin

password: admin
You will need the username and password when you add this camera to your exacqVision system.