Exacq exacqVision IP Camera Quick Start Guide - Manual (Page 7)

www.exacq.com
#500-0024
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 7 of 17
7/15/2014
4
AXIS
AXIS provides the AXIS Camera Management Utility to find IP cameras. Run the utility to display the following window:
AXIS cameras on the network are listed. Right-click a camera and select Enter Device Credentials….
Enter the username and password for the device. Right-click the camera again and select Assign IP….
Enter the IP address, subnet mask, and default router. Click OK to apply the IP address.
NOTE: The factory default login for Axis IP cameras is:

username: root

password: pass
You will need the username and password when you add this camera to your exacqVision system.