Exacq exacqVision IP Camera Quick Start Guide - Manual (Page 10)

www.exacq.com
#500-0024
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 10 of 17
7/15/2014
6
IQinVision
IQinVision provides the iqfinder utility to find IP cameras. Run the utility to display the following window:
Select the camera and click Edit to change the camera’s IP properties.
IQinVision cameras typically do not use DHCP by factory default, you must manually assign the camera an IP address. Enter
an IP address that is not used by any other device on your local network, ensuring that the first three numbers match the
first three numbers of your exacqVision Server’s IP address. Set the subnet to 255.255.255.0 and click Apply.
NOTE:
The factory default login for IQinVision IP cameras is:

username: root

password: system
You will need the username and password when you add this camera to your exacqVision system. To get the IQinVision
camera to factory defaults, hold the reset button in while powering on the camera.