Exacq exacqVision IP Camera Quick Start Guide - Manual (Page 14)

www.exacq.com
#500-0024
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 14 of 17
7/15/2014
10
Sony
Sony provides the IP Setup utility to find IP cameras. Run the utility to display the following window:
Select the camera to edit the camera IP properties. Sony cameras typically do not use DHCP by factory default, you must
manually assign the camera an IP address. Enter an IP address that is not used by any other device on your local network,
ensuring that the first three numbers match the first three numbers of your exacqVision Server’s IP address. Set the subnet
to 255.255.255.0, leave the HTTP port at 80, enter the camera’s Administrator name and password, and click Apply.
NOTE: The factory default login for Sony IP cameras is:

username: admin

password: admin
You will need the username and password when you add this camera to your exacqVision system.