ETA Koloro - Manual (Page 50)

50
GB
Do not use cleaning agents which are rough and abrasive because they will scratch and
damage the surface of the MW oven.
Remove the smells from the inside of the oven by placing a microwaveable dish with water
with lemon juice squeezed from one lemon with skin and letting the microwaves work on it.
Wipe and dry the inside of the oven afterwards.
ATTENTION: Never pour water into the MW oven!
Door
Door and door sealing must remain clean. Wash only with warm water with soap and then
dry thoroughly. Do not use any abrasive agents such as cleaning powders or metal or
plastic scrapers. Metal parts are best maintained by wiping them frequently with a damp
cloth.
Outer parts
Clean outer casing with a fine cloth with warm water, then dry it with a soft cloth. Make sure
that water does not get to the inner parts. If the supply cord gets dirty, wipe it with clean
cloth. Always make sure that the surface of the door sealing is clean.
Turning plate
Clean the glass plate in clean water after each use. Remove the turning circle and clean it
in hot water with soap once a week. It is also necessary to maintain the guiding are clean
so that grease does not prevent the wheels to turn. Otherwise, the noisiness of the oven
might increase.
XI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be received
free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more
details at the local authorities or at a collection site. Fines can be imposed for improper
disposal of this type of waste in agreement with the national regulations. If the appliance is
to be put out of operation, after disconnecting from power supply we recommend its cutoff
and in this way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!