Echo Bear Cat 70385 - Manual (Page 26)

Page 20 Bear Cat Chipper Shredder Operator’s Manual
Assembly
ASSEMBLY INSTRUCTIONS (ALL “S” MODELS)
STEP # 3: INSTALLING THE CHIPPER
CHUTE EXTENSION
6. Place the chipper chute extension onto the chute. Line up
the four holes located on the bottom of the extension and
the top of the chute.
7. Place a 5/16” X 3/4” bolt into each hole. Secure bolt by
screwing on a 5/16” nut. Tighten nut until snug against
the chute extension.
1
2
3
4
5
Figure #19 Chipper Chute Extension
ITEM PART NUMBER DESCRIPTION QTY
1 12175 DECAL, INLET AND DISCHARGE 1
2 14199-00 DECAL, CHIPPER SIZE 1
3 70684-35 WELDMENT, CHUTE EXTENSION 1
CHIPPER CHUTE EXTENSION ASSEMBLY (71771)
ITEM PART NUMBER DESCRIPTION QTY
4 15003 BOLT, 5/16" X 3/4" GR5 HEX 4
5 15356 NUT, 5/16" NE NYLOCK ZP 4
MISCELLANEOUS CHIPPER CHUTE EXTENSION PARTS
If any bolts or nuts are dropped in the shredder be sure to
remove them before starting the machine. Remove items
from the shredder area by removing the discharge screen.
IMPORTANT WARNING
To prevent personal injury or property damage: Shut
off engine, disconnect spark plug wire, remove ignition
key and make sure that all moving parts have come to
a complete stop, before servicing, adjusting or repair-
ing.