Warning, Safety – Echo Bear Cat 70385 User Manual
Page 10
Page 4
Bear Cat Chipper Shredder Operator’s Manual
Safety
12.
Check the bolts correct torque every 10 hours of op-
eration (See torque chart in rear).
13.
Shut off engine and allow machine to stop completely
before clearing debris if the machine becomes
clogged.
14.
On electric start models, disconnect cables from bat-
tery before doing any inspection or service.
10.
Do not tamper with the engine governor settings on
the machine; the governor controls the maximum safe
operating speed and protects the engine and all mov-
ing parts from damage caused by over speed.
11.
Set up your chipping site so as to not endanger the
public.
TOWING SAFETY (MODEL 70580/70580S)
1. Connect hitch safety chains. Tighten and secure trailer
hitch bolts. Do not attempt to tow the trailer if vehicle is
not equipped with a 2” ball.
2. Maximum towing speed is 45 MPH. Inflate tires to manu-
facturers specs as stated on the tire sidewall. Check
wheel lug bolts periodically to ensure they are tight and
secure.
3. Place the jack stand on the trailer in the UP position to
clear the ground while towing. Place the jack stand on a
level surface and secure it in the DOWN position before
use.
4. Never allow passengers to ride on the chipper chute while
moving the vehicle, whether the chipper is running or not.
5. Shut off fuel supply to engine when towing.
6. Disconnect spark plug wire when towing.
15.
Rotate the discharge tube to face the opposite direc-
tion of the towing vehicle before towing. This prevents
the discharge tube from projecting over the trailer wheels
and striking foreign objects.
Failure to maintain proper fastening torque (20 ft. lbs.)
on chipper blade bolts may result in severe damage to
the chipper and / or personal injury.
WARNING