DR Power Dual Action 15-Ton Gas (Aug 2011 - Present) - Manual (Page 8)

8 DR ® DUAL-ACTION GAS LOG SPLITTER
Specifications
Manual Start Electric Start
Engine Refer to Engine Manufacturers User
Manual for Engine Specifications Refer to Engine Manufacturers User
Manual for Engine Specifications
Bed height 24" (610mm) 24" (610mm)
Wedge 6.61" (168mm) h, .75" (19mm) w
high carbon steel. 6.61" (168mm) h, .75" (19mm) w
high carbon steel.
Log Trays 27.45in (697mm) L x 11.45in (290mm) W 27.45in (697mm) L x 11.45in (290mm) W
Force/Tonnage 15 ton 15 ton
Log Length 20 inches 20 inches
Log Diameter* 30 inches 30 inches
Cycle Time Approx. 11 seconds Approx. 11 seconds
Wheels & Tires Dot Approved, 4.8/4-8, Steel Wheel With
Taper Roller Bearings Dot Approved, 4.8/4-8, Steel Wheel With
Taper Roller Bearings
Weight 328 lbs (150kg) 336 lbs (153kg)
Dimensions 64"L X 40.5"W X 38.5"H 64"L X 40.5"W X 38.5"H
Cylinder Size 3" (76mm) Bore, 18.51" (470mm) Stroke 3" (76mm) Bore, 18.51" (470mm) Stroke
Hydraulic Tank 6 Quarts 6 Quarts
Pump Single Stage, 2.84Gal/min (10 L/minute) Single Stage, 2.84Gal/min (10 L/minute)
Control Valve Integrated Pressure Relief Integrated Pressure Relief
Hydraulic Fluid See Table-1 on page 10 See Table-1 on page 10
*The diameter listed is indicative of the maximum suggested size - a small log can be difficult to split when it contains knots or a
particularly tough fiber. On the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the
maximum indicated above.
Assembling the DR DUAL-ACTION GAS LOG SPLITTER
Tools and Supplies Needed:

Two 3/4" Wrenches
 1-1/2" Wrench

Pliers

Soft Face Hammer

Two 1/2" Wrenches
 7/8" Wrench

17mm Wrench
 Two 7/16" Wrenches

Jack Stands

Utility Knife

Wire Cutters
 Safety Glasses