D. save preset, E. restore preset, F. disconnect route – DNF Controls SW32PS_Port_Switcher User Manual
Page 8: G. disconnect gang, Save, Preset, Restore, Disconnect, Route, Gang

Page 7 of 24
SW32PS RS422 Port Switcher
d. SAVE
PRESET
1) Press
[SHIFT] + [PRESET]. The PRESET indicator will turn on.
The first line of the display will show “Save Preset 1.”
2)
Turn the Wheel to select preset number 1-8.
3) Press
[TAKE] to save current configuration into the selected preset.
OR
Press [ESC] to exit without saving.
e. RESTORE
PRESET
1) Press
[PRESET]. The PRESET indicator will turn on.
The first line of the display will show “Restore Preset 1.”
2)
Turn the Wheel to select preset number 1-8.
3) Press
[TAKE] to restore selected preset.
OR
Press [ESC] to exit without restoring.
f. DISCONNECT
ROUTE
1) Press
[FROM].
2)
Turn the Wheel until OFF is displayed.
3) Press
[TO].
4)
Find the destination that is to be turned off.
5) Press
[TAKE] to turn off the route.
g. DISCONNECT
GANG
1) Press
[VIEW].
2)
Turn the Wheel to find the GANG to be disconnected.
3) Press
[GANG]. The display will prompt “Disconnect switches?”
4) Press
[TAKE] to break all the routes that are part of gang.
OR
Press [ESC] to exit.