DNF Controls SW32PS_Port_Switcher - Manual (Page 19)

Page 18 of 24 SW32PS RS422 Port Switcher
Reference . . .
8. SETUP MENU
a. Press
[MENU] to enter MENU mode.
Scroll the Wheel to move between MENU options.
b. Press
[TAKE] to change mode of the device.
c. Press
[ESC] at anytime to exit MENU mode.
MENU MODES (Turning Wheel Clockwise)
SET STROBE Grass Valley Group and PESA Software Options Only
LOCAL MODE SETUP LOCAL mode DISABLE - disable
TAKE and CLEAR operations from the front panel.
You will still be able to view routes.
LOCAL mode ENABLE - enable
TAKE and CLEAR operations from the front panel.
GANG MODE SETUP GANG MODE DISABLE- Disables GANG mode. In that mode, every new
route breaks a previous route that includes the same FROM.
For example: FROM: PORT 1 was routed TO: PORT2.
Created new route: FROM: PORT 1 is now routed TO: PORT3.
The previous route is broken. PORT2 is not routed to anything.
GANG MODE ENABLE- Enables GANG mode. In that mode, every new
route that includes the same FROM does not break a previous one.
For example: FROM: PORT 1 was routed TO: PORT2.
Created new route: FROM: PORT 1 is now routed TO: PORT3.
The previous route is not broken. PORT1 now controls both PORT2 and
PORT3.
CONTROLLER/
DEVICE MODE SETUP
FROM CONTROLLER TO DEVICE
In that mode, FROM port is a port to which a controller is connected.
TO port is a port to which a controlled device is connected.
TO CONTROLLER FROM DEVICE
In that mode, TO port is a port to which a controller is connected.
FROM port is a port to which a controlled device is connected.
CLEAR ALL ROUTES The display will prompt “Are You Sure?”
Press [TAKE] to clear or [ESC] or Turn the Wheel to EXIT.
This option will clear the current configuration of the switcher,
BUT WILL NOT CLEAR PRESETS.
CLEAR ALL MEMORY The display will prompt “Are You Sure?”
Press [TAKE] to clear or [ESC] or Turn the Wheel to EXIT.
This option will clear the current configuration of the switcher AND
PRESETS.