DNF Controls DMAT-MAV - Manual (Page 25)

D D M M A A T T - - M M A A V V 2 2 5 5
7. FUNCTION TABLE
Function Key Press Description
PLAY [PLAY] Puts the currently loaded clip into Play
STOP [STOP] Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
REWIND
[RWD] Press and HOLD to shuttle. Release key to stop. Set WIND speed in
MENU.
FFWD
[FFWD] Press and HOLD to shuttle. Release key to stop. Set WIND speed in
MENU.
JOG [JOG] Select JOG mode and enable the Wheel.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable the Wheel.
SLOMO
[SLOMO] Press SLOMO to slo-mo the VTR. Turn the Wheel or move the T-Bar to
change the play speed. Press SLOMO to STILL frame OR press any
transport key to exit.
MARK IN POINT [IN] Marks new IN point of a Clip
MARK OUT POINT [OUT] Marks new OUT point of a Clip
DELETE
IN POINT [DEL] + [IN] Delete IN point. (Sets the IN point = IN+CLIP Handle Size-see MENU)
DELETE
OUT POINT [DEL] + [OUT] Delete OUT point. (Sets the OUT point = OUT + CLIP Handle Size-see
MENU)
SAVE
CLIP [SAVE CLIP] Save IN and OUT as the CURRENT CLIP OR if the Clip # is entered on
the numeric keypad (0-399), it saves it as that number.
SAVE
CLIP [ALT] +
[SAVE CLIP] Save a clip in any mode.
NAME
CLIP [NAME CLIP] Assign an alphanumeric name to the selected CLIP. Type a name using
an attached PC keyboard (user supplied) or numeric keypad on the ST400.
Press [ENTER] to assign the name to the Clip.
Press [CLEAR] to erase the name of a Clip.
RECALL
CLIP [RECALL CLIP] Loads the currently selected CLIP OR if the clip # is entered on the
numeric keypad (0-399), it loads that clip.
RECUE
CLIP [SHIFT] +
[RECALL CLIP] Recue the loaded Clip to the beginning.
(ONLY available in CP mode).
GOTO IN POINT [SHIFT] +[IN] GOTO the IN Point.
GOTO OUT POINT [SHIFT] +[OUT] GOTO the OUT Point.
RECALL
LAST CLIP [LAST] (In CP Mode) Recalls the Last Clip.
(In Edit Effect) Move between playlist’s elements & view transitions
RECALL
NEXT CLIP [NEXT] (In CP Mode) Recalls the Next Clip.
(In Edit Effect) Move between playlist’s elements & view transitions
MARK CUE POINT [MARK] Marks the recorder’s time into a cue point and advances to the next cue
point.
MARK IN POINT [ALT] +[IN] Marks IN point in any mode
MARK OUT POINT [ALT] +[OUT] Marks OUT point in any mode
RECORD [REC] Returns to EE mode. Unload the clip, loads the same material that is
currently being recorded. Time Code and Video come from the Recorder
VTR.
LAST CUE [LAST] IN PB Mode, search to last cue.
NEXT CUE [NEXT] IN PB Mode, search to next cue.
LAST ELEMENT [LAST] In PL Mode, search to Last Element
NEXT ELEMENT [NEXT] In PL Mode, search to Next Element
SCROLL [SCROLL] Scroll through list of clips
GANG AND
PLAYBACK [GANG] Gangs two playback channels for simultaneous playback.