DNF Controls USP3-SBX-VSS - Manual (Page 9)

8. READ SPYDER COMMAND KEYS IN SHOTBOX
The Spyder Command Keys will automatically be read by the ShotBox:
• After the ShotBox is powered up
• Whenever the Read Command Keys key in the Setup Menu is pressed.
• Whenever the SELECTED PAGEs range key is pressed.
• Whenever a Spyder Device key is pressed.
While the Command Keys are being read, the ShotBox keys will display “Reading
Command Keys”. Key 29 will display “PAGE” and Key 30 will display the page
number currently being read. When Read Command Keys has completed, the
ShotBox keys will display a page of Command key names.
NOTE- The ShotBox keys will be blank when an error occurs reading the
Command Keys or the Command Key page is empty.
9. STEP THROUGH COMMAND KEY SCRIPT
a. Recall a Command Key by selecting a page (F1 – F10) and then pressing the
desired Command Key (LCD Key 1 – 30).
b. Press , Left Arrow key, to step Reverse through the last recalled Command
Key’s script.
c. Press , Right Arrow key, to step Forward through the last recalled Command
Key’s script.
d. Press PREVIEW key to jump to the PREVIEW cue.
e. Press SHIFT + PREVIEW keys to jump to the PROGRAM cue.
USP3-SBX-VSS User Manual Page 9 of 10