DNF Controls USP3-SBX-VSS - Manual (Page 6)

5. REMOTE DEVICE ASSIGNMENT WEB PAGE
Remote Device Label Enter up to 32 characters. The first 12 characters will be displayed on the
ShotBox key when the MENU key is pressed.
Device Type Spyder
Connection Type Greyed out
Connection Mode Greyed out
UDP Attempts Greyed out
IP Address Enter IP address for Spyder to be controlled
Port Number Greyed out
Heartbeat Rate Set heartbeat polling rate. 5 seconds is the recommended setting
Connection Status Displays “Connected” in green when communicating with Spyder.
Displays “---------“ when NOT communicating with Spyder or no IP address
has been entered.
NOTE- The ShotBox will display “WAITING FOR SPYDER” across its keys
when it is not able to communicate with the selected Spyder.
Save Button Click on Save button to save entered settings
Refresh Link Click on Refresh link to refresh Connection Status
NOTE- The ShotBox will display “WAITING FOR SPYDER” across its keys
when it is not able to communicate with the selected Spyder.
Check:
The IP address entered for this Spyder
The Ethernet connection to the ShotBox
The left amber light on the RJ45 should be on
The right green light on the RJ45 shows network activity
USP3-SBX-VSS User Manual Page 6 of 10