DNF Controls USP3-SBX-VSS - Manual (Page 5)

4. SYSTEM CONFIGURATION WEB PAGE
P1 Software Upgrade: Use this link to install the P1 upgrade file provided by DNF Controls
P2 Software Upgrade: Use this link to install the P2 upgrade file provided by DNF Controls
Web Upgrade: Use this link to install the Web pages upgrade file provided by DNF Controls
Save Configuration to PC: Use this link to save the ShotBox’s current configuration to a configuration file
on a computer. The web browser will prompt for file name and directory. The
file extension must be ‘dnf’.
Restore Configuration from PC: Use this link to download a configuration file from your computer to the
ShotBox. The web browser will prompt for directory and configuration file
name. The file extension must be ‘dnf’.
Set Factory Defaults: Use this link to reset all ShotBox configuration settings to factory defaults. This
will NOT change the IP address, subnet mask or gateway address. The
ShotBox will automatically reboot.
Enter the new IP settings below: Enter the new IP address, Gateway, and Subnet Mask. Click on Save Config to
save the new entries. The ShotBox will automatically reboot.
USP3-SBX-VSS User Manual Page 5 of 10