Setup menu – DNF Controls USP3-SBX-VSS User Manual
Page 8
7. SETUP MENU
Press the ShotBox MENU key to enter the Setup Menu.
Keys 1 & 2 display the ShotBox software version.
Keys 3, 4, & 5 display the ShotBox’s IP Address, Subnet Mask, Gateway Address, and
MAC Address.
Press Key 10 to Read Command Keys from the selected Spyder and in the selected
page range.
Press Key 11 to toggle between Cue 0 and Cue 1. The current cue number is displayed
on the key. The recalled Command Key will cue to this value.
Press Key 21 to read Command Keys from pages 1 - 10 on selected Spyder. Key face
will turn red.
Press Key 22 to read Command Keys from pages 11 – 20 on selected Spyder. Key
face will turn red.
Press Keys 15 through 18 and 25 through 28 to select the current Spyder. Only the
selected Spyder will be controlled by the ShotBox. The selected Spyder’s key face will
turn red.
Press Key 30 to exit the menu.
When a Spyder is selected, its Command Keys will automatically be read by the
ShotBox, in the currently selected page range.
When a SELECTED PAGES range is selected, the Command Keys for that range on the
selected Spyder will automatically be read by the ShotBox.
NOTE-
All menu settings are saved in non-volatile memory in the ShotBox and will be
restored after the ShotBox is powered up.
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
3
P1
Software
Version
P2
Software
Version
IP
Address
Subnet
Mask
Gateway
Address
MAC
Address
Read
Command
Keys
Default
Cue
0
Exit
Menu
Select
PAGES
1 - 10
Select
PAGES
11 - 20
DEV5
Spyder
Name
DEV6
Spyder
Name
DEV7
Spyder
Name
DEV8
Spyder
Name
DEV1
Spyder
Name
DEV2
Spyder
Name
DEV3
Spyder
Name
DEV4
Spyder
Name
USP3-SBX-VSS User Manual
Page 8 of 10