DNF Controls 4000CL-MAV70 - Manual (Page 6)

6 4000CL-MAV70, 400 Clip Fast Access System, for MAV70
4.
LOAD AND PLAY A CLIP
a. Press [CLIP LIST] to view the list of Clips that exist in the VIDEO SERVER.
The display will show “CREATE NEW CLIP.”
b. Turn the Wheel. The top line of the display will show “xxxxxxxx:”
Where “xxxxxxxx” is the eight-character CLIP ID.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available Clips.
OR
Manually enter a CLIP ID from the ST300 numeric keypad.
Create an ID, with a maximum of eight characters. Press [ENTER].
c. Press [LOAD] to load the current CLIP ID shown on the top line of the display.
d. Press [PLAY].
5. RECUE THE CURRENTLY LOADED CLIP
a. Press
[RECUE] to recue the CLIP to its beginning.
(In RECALL mode, [RECUE] will recue to the user defined in time.)
OR
Press [SHIFT] + [RECUE].
The display will show: “xx:xx:xx:xx” (Where xx:xx:xx:xx = Last entered RECUE time.)
“Enter RECUE time”
b.
Enter the desired time to search using the ST300’s numeric keypad.
c. Press
[ENTER] to go to the entered time.
OR
Press [ESC] to exit without searching
6. VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
Press and hold [SHIFT]; then press and release [LOAD].
The bottom line will show: “Loaded Clip: xxxxxxxx”
where xxxxxxxx is the CLIP ID.