DNF Controls 4000CL-MAV70 - Manual (Page 12)

12 4000CL-MAV70, 400 Clip Fast Access System, for MAV70
12. FUNCTION TABLE
Function Key Press Description
GOTO
ENTERED
TIME [SHIFT] + [RECUE] Search the VTR to the manually entered time.
Use the ST300 numeric keypad. Press [ENTER] or
[RECUE].
NOTE: G
RASS V ALLEY G ROUP Profile does not support
TC or VITC time search.
GANG [SHIFT]+[VTR #1]
OR
[SHIFT]+[VTR #2]
OR
[SHIFT]+[VTR #3]
OR
[SHIFT]+[VTR #4]
Individually press the VTR keys to be included in the gang;
the LED above the key will turn on. Press the VTR key
again to remove from the gang; the LED above the key will
turn off. Press [ESC] to exit.
The VTR LEDs that are on show the gang.
The flashing LED shows which VTR is currently selected.
FFWD
[FFWD] Press and HOLD to shuttle. Release key to stop. Set
WIND Speed in MENU.
JOG [JOG] Select JOG mode and enable Wheel.
LAST CUE [LAST CUE] Step to the previous Cue Point Location.
NEXT CUE [NEXT CUE] Step to the next Cue Point Location.
RECORD [REC] Places VTR into the Record mode selected by RECORD
MODE in the SETUP MENU. Press [RECORD] or
[RECORD] + [PLAY].
REWIND
[RWD] Press and HOLD to shuttle. Release key to stop. Set
WIND Speed in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable Wheel.
STOP [STOP] Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
LOOP [SHIFT] + [PLAY] Play the currently loaded clip in a continuous loop.
TIME MODE
SELECT [TIME MODE] Press to toggle between Timecode (TC), VITC (VT) or
Tape Timer (TM) display modes.