DNF Controls 4000CL-MAV70 - Manual (Page 11)

11 4000CL-MAV70, 400 Clip Fast Access System, for MAV70
Reference . . .
11. SETUP MENU
Press [MENU]. The MENU indicator will turn on.
Turn the Wheel to select item to change.
Press [MENU] OR use the Softkeys to change the desired mode for that option.
Turn the Wheel at anytime to select another item.
Press [ESC] at anytime to exit SETUP MENU. The MENU indicator will turn off.
MENU MODES (Turning Wheel clockwise)
RECORD Press [MENU] to select the desired record mode:
Lockout, Assemble, Crash (Full) or Insert.
Only in INSERT mode: Press the associated Softkey, located below the
display, to toggle Video(V), Audio1(A1), Audio2(A2), Audio3(A3),
Audio4(A4) on/off.
WIND MODE Press Softkey to select:
HOLD
(Fast wind is maintained only while key is depressed.)
OR
LATCH
(Fast wind is initiated and maintained with momentary key press.)
Select fast wind speed (3.9 to 23.7) by pressing Softkey below SPD.
ST300 SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [YES] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [YES] when asked “Are You Sure?”
DISPLAY SOFTWARE
VERSION
The version number for the currently installed software is displayed.
RECORD Press Softkey to select single button or 2-button record.
RECORD = [REC] Only
OR
RECORD = [REC] + [PLAY]
TRANSMIT CUELIST Transmits Cuelist to another ST300 or to a PC.
RECEIVE CUELIST Receives Cuelist from another ST300 or a PC.
ST300 SETUP
Clear Cues SetDefault