DNF Controls 2034CL-L Vs.3.0 - Manual (Page 14)

14 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol
12. ENTER RECORD DURATION
a. Press
[SHIFT] + [REC].
b.
The display shows current Record Duration.
c.
Enter the desired Record Duration using the ST300’s numeric keypad.
d. Press
[ENTER] to save the entered value.
OR
Press [ESC] to exit without saving.
13. RECUE THE CURRENTLY LOADED CLIP
a. Press
[RECUE] to reload the currently loaded clip to the IN point.
b. Press
[SHIFT] + [RECUE].
The display will show: “xx:xx:xx:xx”
(Where xx:xx:xx:xx = Last entered RECUE time.)
“Enter RECUE time “
Enter the desired time using the ST300’s numeric keypad.
Press [ENTER] to reload the currently loaded clip at the entered time.
OR
Press [ESC] to exit without searching.
14. VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
a.
Press and hold [SHIFT], then press and release [LOAD].
b.
The bottom line will show: “Loaded Clip: xxxxxxxx”
Where xxxxxxxx is the CLIP ID.