Digital Audio Labs Livemix CS-DUO Personal Mixer User Guide - Manual (Page 37)

LIVEMIX CS-DUO 35
MIX-16/32 USB MIX ASSIGN
The Livemix system allows you to output the stereo
mix from any CS-DUO, using the MIX-16/32 USB port.
The assign screen tells the system which CS-DUO’s
mix to send to the MIX-16/32 USB port.
1. Decide which CS-DUO in the system will provide
the master output to be recorded.
2. PRESS the MIX-16/32 USB Mix Assign button.
3. You will see a message that says “Send your mix
to the MIX-16/32 USB record port?” PRESS “Yes”
to proceed or “No” to cancel
The stereo mix from that CS-DUO will be sent to the USB port of the MIX-16/32. You can then
connect a Windows PC or Apple OS X computer and record the stereo signal into your audio
recording software of choice.
INPUT SELECT AND DIGITAL
CONFIGURATION
If the LM-DANTE-EXP option card is installed in the
MIX-16/32, the Input Select and Digital Configuration
button will be visible. This function will prepare the
system to accept audio from the AD-24, or the Dante
Network.
1. From the Global Setup page, PRESS the Input
Select and Digital Configuration button.
2. You will be prompted with a warning. PRESS the
Continue button to continue.
3. PRESS the Input Source Select button.
4. SELECT AD-24 for analog inputs or Dante Inputs to recieve audio from the Dante Network.
5. PRESS the Confirm Selection button.