Digital Audio Labs Livemix CS-DUO Personal Mixer User Guide - Manual (Page 33)

LIVEMIX CS-DUO 31
MIRRORMIX
MirrorMix allows you to hear and adjust another personal mix in the system. This allows more
experienced users to aid others when necessary. It is a great tool for a front of house engineer or for
training performers on personal mixing.
To connect to another mix, you will need to know the
Port Number of that mix or the name of the mix that
is loaded on the remote CS-DUO. The port number
is derived from the port each CS-DUO is plugged
into on the MIX-16/32. If the remote unit has loaded
a mix, the mix name will also display in the MirrorMix
Port selection box.
• MIX A (blue) will have an “A” after the port
number, and be colored blue in the MirrorMix
selection box.
• MIX B (red) will have a “B” after the port number
and be colored red in the MirrorMix selection
box.
TIP: The mix name and port number are visible from
the Mix Tools screen of the remote unit. You may
need the performer to let you know what port they
are connected to with the intercom.
TO CONNECT TO ANOTHER CS-DUO:
• PRESS the MirrorMix button from the Mix Tools
menu
• PRESS the button of the port/mix you wish to
MirrorMix.
• When you see an orange colored Channel
Overview, you will know you are mixing a remote
mix. At this point, you will hear the remote mix
and can make adjustments accordingly.
• You can also LOAD a mix to the remote CS-DUO.
This will load from your local CS-DUO (or
connected USB flash drive).
• To exit MirrorMix, press the X in the lower right of
the Channel Overview.
NOTE:
While you can load a mix to a remote
CS-DUO, you cannot save a mix
remotely. Once you have created a
remote mix, it is advisable for the remote
user to save their mix.
LIVEMIX
DATA IN
24VDC
3.75A
LIVEMIX
DATA OUT
STEREO MIXES 1-16
LIVEMIX
DATA OUT
MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MIX-32
LM-DANTE-EXP
Dante™ is a trademark of Audinate Pty Ltd.
PRIMARY SECONDARY
LINK/ACT 1G LINK/ACT 1G