Digital Audio Labs Livemix CS-DUO Personal Mixer User Guide - Manual (Page 27)

LIVEMIX CS-DUO 25
METRONOME
The CS-DUO contains an internal metronome that can be used to keep everyone at the same tempo
throughout a song. When the Metronome is activated, everyone can hear the click track as long as
the Metronome volume is turned up in their mix.
In addition to the standard volume and pan options, the
Metronome configuration is accessible via the Single Channel
View.
BPM (BEATS PER MINUTE)
BPM displays the current tempo.The quickest way to set a tempo
is to PRESS the BPM button and use the ADJUST knob to dial in
a tempo.
MET ON/OFF BUTTON
The Met On/Off button turns the metronome off and on.
MET SETUP BUTTON
PRESS the Met Setup button to access the setup for the Metronome.
SETTING UP THE METRONOME
The internal metronome has a number of options that can be
accessed by pressing the Met Setup button.
1. BPM: Press BPM to adjust the tempo of the metronome. Use
the ADJUST knob to change the tempo.
2. BEATS PER MEASURE: PRESS the Beats per Measure button
to cycle through the options for number of beats in each
measure.
3. BEAT DIVISIONS: PRESS the Beat Divisions button to cycle
through the options for dividing each beat. Beat divisions are played with a different click tone.
4. BEAT ACCENT: PRESS the Beat Accent button to accent the downbeat of each measure with a
different click tone.
5. Beat Presets: PRESS one of the predetermined tempo buttons to instantly change to that
MORE ABOUT THE METRONOME
• The Metronome signal is global, so if a user starts metronome playback, everyone will hear it if
the metronome volume is turned up for their CS-DUO unit.
• The Metronome can be changed by any CS-DUO user on the network.
• If you need more robust Metronome control than is offered by the internal metronome, you
can use the CS-DUO’s AUX IN connector with an external hardware metronome.