Digital Audio Labs Livemix System Quick Start Guide - Manual

WWW.DIGITALAUDIO.COM
LIVEMIX SYSTEM QUICK START
rev 1.1
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
1 2 3 4 5 6 7 8
MIX-16
LIVEMIX
DATA AD-24
USB CS PORT FOOTSWITCH MIX A OUT MIX B OUT
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
SHIELDED
CAT5
GIGABIT NETWORK SWITCH
DANTE ENABLED MIXER/SNAKE/INTERFACE
CAT5/CAT6
CAT5/CAT6
LM-DANTE-EXP
Dante™ is a trademark of Audinate Pty Ltd.
DANTE NETWORK
LINK/ACT 1G
CAT5/CAT6
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
ANALOG MIXER/SNAKE/INTERFACE
TRS CABLE
DB25 CABLE
(TASCAM PINOUT)
MIX A HEADPHONES AUX IN MIX B HEADPHONES
ANALOG OUTPUTS TO
AD-24 INPUTS
1. Connect the direct outputs of your analog mixer,
snake or interface to the individual analog inputs
on the AD-24.
2. The AD-24 offers both 24 individual ¼” inputs
and three 8-channel DB-25 inputs.
3. The ¼” TRS connections 1-24 are mirrored (in
parallel) on DB-25 connections 1-24 so they can
operate as a pass-through if necessary.
If your mixer does not have direct outs, you can
use the channel inserts, using a specially wired
cable that connects the “tip” and “ring” signal.
Consult your Digital Audio Labs dealer for
details on obtaining this cable.
1
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
1 2 3 4 5 6 7 8
MIX-16
LIVEMIX
DATA AD-24
USB CS PORT FOOTSWITCH MIX A OUT MIX B OUT
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
SHIELDED
CAT5
GIGABIT NETWORK SWITCH
DANTE ENABLED MIXER/SNAKE/INTERFACE
CAT5/CAT6
CAT5/CAT6
LM-DANTE-EXP
Dante™ is a trademark of Audinate Pty Ltd.
DANTE NETWORK
LINK/ACT 1G
CAT5/CAT6
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
ANALOG MIXER/SNAKE/INTERFACE
TRS CABLE
DB25 CABLE
(TASCAM PINOUT)
MIX A HEADPHONES AUX IN MIX B HEADPHONES
AD-24 TO MIX-16/32 3
1. Connect a shielded CAT5 cable from the
Livemix Data Out of the AD-24 to the Livemix
Data In of the MIX-16/32.
2. A direct connection between the AD-24 and
the MIX-16/32 is required. The system will not
function if a switch or hub is used between
the two devices.
1. Using CAT5 cable, connect each CS-DUO to
one of the output ports on the front panel of
the MIX-16/32*.
2. A direct connection between the MIX-16/32
and CS-DUO is required. The system will not
function if a switch or hub is used between the
two devices.
*MIX-16 pictured
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
1 2 3 4 5 6 7 8
MIX-16
LIVEMIX
DATA AD-24
USB CS PORT FOOTSWITCH MIX A OUT MIX B OUT
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
SHIELDED
CAT5
GIGABIT NETWORK SWITCH
DANTE ENABLED MIXER/SNAKE/INTERFACE
CAT5/CAT6
CAT5/CAT6
LM-DANTE-EXP
Dante™ is a trademark of Audinate Pty Ltd.
DANTE NETWORK
LINK/ACT 1G
CAT5/CAT6
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
ANALOG MIXER/SNAKE/INTERFACE
TRS CABLE
DB25 CABLE
(TASCAM PINOUT)
MIX A HEADPHONES AUX IN MIX B HEADPHONES
MIX-16/32 TO CS-DUO 4
SYSTEM
QUICK START
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
1 2 3 4 5 6 7 8
MIX-16
LIVEMIX
DATA AD-24
USB CS PORT FOOTSWITCH MIX A OUT MIX B OUT
LIVEMIX DATA IN 24VDC 3.75A
LIVEMIX DATA OUT STEREO MIXES 1-16
LIVEMIX DATA OUT MIX-16/32 STEREO MIXES 17-32 (MIX-32 ONLY)
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
PUSH TO SETUP MASTER OUT
PUSH TO SETUP ME & GROUP
SHIELDED
CAT5
GIGABIT NETWORK SWITCH
DANTE ENABLED MIXER/SNAKE/INTERFACE
CAT5/CAT6
CAT5/CAT6
LM-DANTE-EXP
Dante™ is a trademark of Audinate Pty Ltd.
DANTE NETWORK
LINK/ACT 1G
CAT5/CAT6
12VDC 3.33A
LIVEMIX DATA OUT
AD-24
ANALOG MIXER/SNAKE/INTERFACE
TRS CABLE
DB25 CABLE
(TASCAM PINOUT)
MIX A HEADPHONES AUX IN MIX B HEADPHONES
AD-24 SETUP 2
1. The AD-24 can accept -10dBV and +4dBu line
level audio. Press the button IN for +4dBu signals
and leave it OUT for -10dBV signals. These op-
erate in stereo pairs, one switch controls both
inputs. If you are unclear on which to use, consult
the manual of the product you are connecting.
2. The front panel has LED indicators to tell you the
signal strength of an input.
• GREEN indicates a signal with appropriate
levels.
• YELLOW indicates the signal level needs to
be lowered. Periodic yellow levels may be
acceptable.
• RED indicates the signal is clipping and will
sound distorted.