Diamondback Fitness 910Ef User Manual
Page 48

46
User Gender Data Entry
“User 1 gender” or “User 2 gender” will post in the lower display (depending upon which user profi le was selected). The default
or previously adjusted user gender value will fl ash in the Display Matrix. Use the UP and DOWN arrow keys to view the user gen-
der op ons (“Male”,“Female”). To select the displayed gender se ng, press the ENTER key. Press the ENTER key to return to the
User Setup profi le selec on mode, or press STOP to save all adjusted se ngs and return to Idle mode or previous program.
MAINTENANCE
All Diamondback Fitness products are engineered for years of near-silent opera on. Let noise be your fi rst indica on that a
repair or adjustment is required. Please, discon nue use immediately and contact an Authorized Service Technician or Diamond-
back Fitness Dealer if an unusual noise, scraping, knocking, grinding or vibra on is detected. O en, a minor issue will become a
major repair if ignored and use is con nued.
Prior to each workout, confi rm that all adjustment levers and screws are ghtened. Tighten crank arms once per month. Loose
cranks arms will become damaged and are not covered under the Warranty.
Your Diamondback Fitness product is manufactured of the most durable materials available. The plas cs are molded of strong
and chemical-resistant ABS and PVC. The frame is produced of high-tensile steel and protected with an industrial-grade, powder
paint coa ng for the highest level of corrosion resistance. It is important to note however, that perspira on can be extremely cor-
rosive if allowed to accumulate on the machine. A er training, always wipe down the unit with a mild soap solu on followed by
a thorough drying with a clean towel. Loca ng a small spray bo le and towel near the unit will help ensure that your Diamond-
back Fitness equipment looks new for many years.
NOTE: Perspira on is very corrosive and if allowed to remain on the machine, will cause discolora on, fading, rust and odors.
Unfortunately, these condi ons are not covered under the Warranty Policy.