Diamondback Fitness 910Ef - Manual (Page 24)

22
Heart Rate Bar Graph
The Heart Rate Bar Graph provides the user with meaningful heart rate feedback in an easy-to-read format.
When a heart rate signal is detected, the bars of the graph will light to indicate at which percentage of the user’s
maximum heart rate and training zone (Warm Up, Fat Burn, Cardio, or Peak) the user is opera ng within. The
Heart Rate Bar Graph will not light if the user is opera ng in guest mode or no heart rates signal is detected. If
the QuickStart program is running, the default age value will be used to calculate the es mated maximum heart
rate.
Matrix Display
When the console operates in the program run mode, the matrix will graphically display the re-
sistance level and profi le for the selected program. A higher stack represents a higher resistance
level, while a fl ashing column indicates the user’s progress in the program at any given me.
Each ver cal column represents a me interval determined by the total length of the program.
Each column will equal 1/40th of the total program length. For example, if the program length
is 30 minutes, each column will equal 45 seconds. The Matrix Display will also provide messaging and feedback during the
setup modes.
Distance
Distance will be displayed in either Miles or Kilometers, depending upon the selec on made in the console
setup mode (see sec on tled English Unit Mode and Metric Unit Mode). The distance calcula on is an es ma-
on based upon the user’s RPM.
Calories
The Calories fi eld tracks the es mated number of calories burned from the beginning of the program and is a
deriva ve of the Wa s generated, the user’s RPM and the resistance level.
CONSOLE