48” mount bolt kit, Technical, Missing parts warranty – DH Satellite 1PC or 4PC 3m, 3.7m, & 3.8m 48 Polar/Fixed Mount User Manual
Page 17: Page 9

Technical
:
Michael Doll or Cindy Wille
M-F 8AM – 4:30PM CST
608-326-8406 or 800-627-9443
or
3.0m, 3.7m & 3.8m w/48” Mount
Antenna to Ring
8-1/2" x 3” Bolts
8-1/2" Nuts
8-1/2" Lock Washers
8-1/2" Flat Washers
16-1/2" Rubber Washers
C14F Feed Assembly
1- Set of Struts (4)
1-Collar
8-1/4” x 1 1/2” Bolts
8-1/4" Lock Washers & Nuts
Back Braces
8- Back Braces
8-1/2" x 1 1/2" Bolts
8- 1/2" Lock Washers
24-1/2" Nuts
8-Bent Tabs
8-Brace Clips
8-3/8" x 1 1/2" Bolts
8-3/8" Nuts
16-1/4" x 3/4" Bolts
16-1/4" Nuts
8-3/8" Lock Washers
16-1/4" Lock Washers
Back Brace Length
3.0m- 37” Long
3.7m- 50” Long
3.8m- 53” Long
Base Can to Mount
2-3/4" x 5" Bolts
2-3/4" Lock Washers
2-3/4" Flat Washers
2-3/4" Nuts
Locking Bar
1- 27 ½” Lock Bar
2-1/2" x 1 1/2" Bolts
2-1/2" Nuts
2-1/2” Lock Washers
Turnbuckle
1- Turnbuckle
2- 1/2” x 1 1/2” Bolts
2- 1/2” Nuts
2- 1/2” Lock Washers
1- 8” Spade Bolt
Actuator
2-1/2 x 2 1/2" Bolts
2-1/2" Nuts
2-1/2" Lock Washers
Template Rib Hardware: Sectional
Antenna Size
¼” x ¾” Bolts
¼” Lock Washers
¼” Nuts
3.0M
44
44
44
3.7M
52
52
52
3.8M
56
56
56
Splice Straps: Sectional
Antenna Size
Splice Straps
¼” x ¾” Bolts
¼” Lock Washers
¼” Nuts
3.0M
4
8
8
8
3.7M
4
8
8
8
3.8M
4
8
8
8
Missing parts warranty:
Factory warranty on missing parts is 30 days ARO. DH will supply parts and shipping Regular
UPS at no charge for 30 days ARO within the continental US. Red label within the US is only covered by DH if notified
within three days ARO. Missing parts warranty is void 30 days ARO.
NOTE:
Stainless steel or DURA-CON® hardware provided.
*DURA-CON® is a corrosion resistant coating.
DURA-CON®: Problem of thread-galling is eliminated.
Page 9
NOTE: SECTIONAL ANTENNAS INCLUDE ADDITIONAL HARWARE, SEE TABLES BELOW
48” MOUNT BOLT KIT
3/4” Set Screws (4)
Feedhorn to Collar & LNB
3-1/4” x 3/4" Bolts
3-1/4" Lock Washers
3-1/4" Nuts
(LNB to Feed)
20-1/4” x 3/4" Bolts
20- 1/4" Nuts
20- 1/4” Lock Washers
Heavy Duty Feed Struts
C14F or C24
1- Set of 4 Strut
s
1-
Colla
r
(C, Ku
)
1
2-
5/16” Lock Washers & Nuts
4- 2'
x
2
'
Angle Bracket
s
4- 5/16” x 1 ½” Bolts
8- 5/16” x 2 ¼” Bolts
Ku4FL: 3PC
ADD TO C14F
3- Section to 3pc collar
3 8-32 x 1” Bolts
( 3pc Collar To Horseshoe)
3 8-32 x ¾” Bolts
3- #8 Fender Washers
3 8-32 Nuts