DH Satellite 1PC or 4PC 3m, 3.7m, & 3.8m 48 Polar/Fixed Mount - Manual (Page 11)

Feed Struts
2" x 2" Angle Brackets
Antenna
5/16" x 2 1/4" Bolts
5/16" x 1 1/2" Bolt
C14F-HD or C24HD COLLAR
1/2" x 3" Bolt
Use the top 2 holes on this end
when using a 48" mount ring w/HD Collar
3/8"
7/8"
5/8"
3/8"
1 1/2"
1"
58" x 1" x 1 1/2" Strut
1 11/16"
3" 1 15/16"
11/32" Holes 11/32" Holes
All Holes 11/32" dia.
Black Painted strip on this end
This strut is used for 48" mount with:
HD Feed collar
Black painted end goes toward the Antenna on 48" Mt
Notes
Use the top 2 holes on the strut for the C14HD or C24HD
Bolt goes through the 1-1/2" wide side of the feed strut
DH SATELLITE
PRAIRIE DU CHIEN, WISCONSIN 53821
PHONE (608) 326-8406
P.O. BOX 239
DESCRIPTION:
DRWN BY: DATE;
SCALE: REVISED:
DRWG#:
Feed Assembly for 48" Ring: C14F-HD/C24HD
MD/GILBERTS
12-16-14
7-31-98
NOT TO SCALE
C14HD feed for 48ring
C14F-HD/C24HD 48" MOUNT
This bolt hole not used
This bolt hole not used
Bottom hole is for Seavey type feed
Top hole is for Chaparral type feed
Page 6A