DFI EL339-B - Manual (Page 78)

78
3
BIOS Setup
PC Health Status
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Case Open Warning
Shutdown Temperature
Current System Temp
Current CPU Temperature
Current AUX Temperature
System Fan Speed
CPU Fan Speed
2nd Fan Speed
CPU Voltage
+5V
Chipset Voltage
DDR3 Voltage
+12V
VCC3 (V)
VBAT (V)
3VSB
System Fan Temperature
System Fan Tolerance Value
CPU FAN Temperature
CPU FAN Tolerance Value
2nd Fan Temperature
2nd Fan Tolerance Value
Disabled
60 o C/140 o F
38 o C/100 o F
35 o C/95 o F
46 o C/114 o F
0 RPM
1132 RPM
0 RPM
1.29V
5.08V
1.11V
1.48V
12.20V
3.31V
3.02V
3.31V
35 o C/95 o F
5
40 o C/104 o F
5
35 o C/95 o F
5
Case Open Warning
Set this field to Enabled to allow the system to alert you of a chassis intrusion
event.
Shutdown Temperature
You can prevent the system from overheating by selecting a temperature at
which the system will shutdown. If the system detected that its temperature ex-
ceeded the one set in this field, it will automatically shutdown.
Current System Temp to 3VSB
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
System FAN Temperature
This field is used to select the temperature at which the system fan runs at full
speed. The temperature will vary within the range of the tolerance value selected
in the field below.


The screen above list all the fields available in the PC Health Status submenu, for ease
of reference in this manual. In the actual CMOS setup, you have to use the scroll bar
to view the fields. The settings on the screen are for reference only. Your version may
not be identical to this one.