Hardware installation, Sata (serial ata) connectors – DFI EL339-B User Manual

Page 40

Text mode
Original mode

Hardware Installation

Parallel

The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.

BIOS Setting

Configure the Serial ATA drives in the Integrated Peripherals submenu (“OnChip
IDE Device” section) of the BIOS. Refer to chapter 3 for more information.

SATA (Serial ATA) Connectors

SATA 4 SATA 3

SATA 2 SATA 1

RXN

GND

TXP TXN

GND

RXP GND

This manual is related to the following products:

EL109-N