DFI EL339-B - Manual (Page 68)

68
3
BIOS Setup
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to power-on
the system.
Button only
Default setting. Uses the power button to power on the system.
Password
When this option is selected, set the password you would like to use to pow-
er-on the system in the “KB Power On Password” field.
Hot Key
When this option is selected, select the function key you would like to use to
power-on the system in the “Hot Key Power On” field.
Mouse Left
When this option is selected, double-click the left button of the mouse to
power-on the system.
Mouse Right
When this option is selected, double-click the right button of the mouse to
power-on the system.
Any Key
Press any key to power-on the system.
Keyboard 98
When this option is selected, press the “wake up” key of the Windows® 98
compatible keyboard to power-on the system.
Super IO Device
Move the cursor to this field and press . The following screen will appear.
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Power On Function
x KB Power ON Password
x Hot Key Power On
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
x ECP Mode Use DMA
PWRON After PWR-Fail
BUTTON ONLY
Enter
Ctrl-F1
Enabled
3F8/IRQ4
2F8/IRQ3
378/IRQ7
SPP
EPP1.7
3
Off
The settings on the screen are for reference only. Your version may not be identical to
this one.