Datalogic Scanning MATRIX 1000 - Manual (Page 38)

Matrix-1000™
28
3
3.3 STARTUP
After completing the mechanical and electrical connections to Matrix-1000
, you can
begin software configuration as follows:
1. Power on the Matrix-1000
 reader. Wait for the reader startup. The system
bootstrap requires a few seconds to be completed. The reader automatically
enters Run Mode.
2. Run the VisiSet™ program.
3. Press Connect on the VisiSet™ menu bar. The PC will automatically connect to
the Matrix-1000
 reader.
Upon connection, Matrix-1000
 exits Run Mode and displays the Main Menu on
VisiSet™ with all the commands necessary to monitor your reader's
performance. You can select these commands using the mouse or by pressing
the key corresponding to the letter shown on the button. See Figure 28.
Figure 28 - Main Window
Menu Bar
Terminal
Window Commands
Window
Status Bar