3 software configuration, Visiset™ system requirements, Installing visiset – Datalogic Scanning MATRIX 1000 User Manual
Page 37: Software configuration, Pars. 3.1, 3.2, 3.3)
SOFTWARE CONFIGURATION
27
3
3 SOFTWARE
CONFIGURATION
Software configuration of your Matrix-1000
reader can be accomplished by
VisiSet™ through the Matrix-1000
auxiliary serial interface.
3.1 VISISET™ SYSTEM REQUIREMENTS
To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds
the following:
•
Pentium processor
•
Win 95/98/2000, NT 4.0 or XP
•
32 MB Ram
•
5 MB free HD space
•
one free RS232 serial port with 115 Kbaud
•
SVGA board (800x600) or better using more than 256 colors
3.2 INSTALLING
VISISET™
To install VisiSet™, proceed as follows:
1. Turn on the Laptop or PC that will be used for configuration (connected to the
Matrix-1000 auxiliary port).
2. After Windows finishes booting, insert the CD-ROM provided.
3. Launch VisiSet™ installation by clicking
Install VisiSet™.
4. Follow the instructions in the installation procedure.