DFI KS210-IMX6 Manual - Manual (Page 25)

www.dfi .com
25
Chapter 4 Ports and Connectors
Chapter 4
12~36V DC-in
DC-in
This jack is considered a low power solution. Connect a DC power cord to this jack. Use a
power adapter within 12~36V DC output voltage. (We only provide 12V power adapter in the
optional package contents.) Using a voltage out of the range 12~36V may fail to boot the sys-
tem or cause damage to the system board.
RJ45 LAN Port
The onboard RJ45 LAN port allows the system board to connect to a local area network by
means of a network hub.
LAN