Chapter 10 – DFI DT122-SB Manual User Manual
Page 71
www.dfi .com
71
Chapter 10 Intel AMT Settings
Chapter 10
29. Select Dynamic DNS Update then press Enter. Select Enabled or Disabled then press
Enter.
INTEL (R) ME NETWORK NAME SETTINGS
Host Name _
Domain Name _
Shared/ Dedicated FQDN
Dynamic DNS Update
Disabled
Enabled
30. Select Previous Menu until you return to the Intel(R) ME Network Setup menu.
Select TCP/IP Settings then press Enter.
TCP/ IP SETTINGS
> Wired LAN IPV4 Confi guration
[
] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
31. In the TCP/IP Settings menu, select Wired LAN IPV4 Configuration then press
Enter.
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
Disabled
Enabled
32. Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select
Activate Network Access then press Enter. Type Y then press Enter.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
< Enabled>
> SOL/ IDER/ KVM
> User Consent
Password Policy
>
Network Setup
Activate Netwok Access
Unconfi gure Network Access
> Remote Setup And Confi guration
[
] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Activiates the current network settings
and opens the ME netwotk interface
Continue: (Y/N)
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.