DFI DT122-SB Manual - Manual (Page 63)

www.dfi .com
63
Chapter 10 Intel AMT Settings
Chapter 10
4. In the Save & Exit menu, select Save Changes and Reset then select OK.
Reset the system after
saving the changes.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
Launch EFI Shell from fi le system device
Chipset Advanced Main Boot Security Save & Exit
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enable Intel ® AMT in the Intel ® Management Engine BIOS
Extension (MEBX) Screen
1. When the system reboots, the following message will be displayed. Press as
soon as the message is displayed; as this message will be displayed for only a few sec-
onds.
2. You will be prompted for a password. The default password is “admin”. Enter the default
password in the space provided under Intel(R) ME Password then press Enter.
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
Main Menu
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Confi guration
MEBx Exit
Intel (R) ME Password
[ ] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Version 2. 14. 1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Date: 02/17/2012 18:13:29 Ver: 1APTJ
Press to enter MEBS setup menu
Press or to enter setup
American
Megatrends