Installing a 2.5" or 3.5" sata drive, Installing a 2.5" sata drive, Chapter 3 – DFI DT122-SB Manual User Manual
Page 12
www.dfi .com
12
Chapter 3 Installing Devices
Chapter 3
Installing a 2.5" or 3.5" SATA Drive
Installing a 2.5” SATA Drive
2. Turn to the other side of the drive bay and remove the 4 mounting screws that secure the HDD
brackets to the drive bay.
Mounting screw
Mounting screw
Mounting screw
Drive bay
Drive bay
3. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket and
then use the provided mounting screws to secure the drive in place.
Mounting screw
SATA drive
HDD bracket
Mounting screw
1. Remove the 4 mounting screws that secure the drive bay to the chassis and then remove the
drive bay.