DFI DT122-SB Manual - Manual (Page 64)

www.dfi .com
64
Chapter 10 Intel AMT Settings
Chapter 10
3. Enter a new password in the space provided under Intel(R) ME New Password then press
Enter. The password must include:
• 8-32 characters
• Strong 7-bit ASCII characters excluding : , and ” characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
Main Menu
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Confi guration
MEBx Exit
Intel (R) ME Password
Intel (R) ME Password
[ ] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
4. You will be asked to verify the password. Enter the same new password in the space pro-
vided under Verify Password then press Enter.
5. Select Intel(R) ME General Settings then press Enter.
Main Menu
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Confi guration
MEBx Exit
Intel (R) ME Password
[ ] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Verify Password
Main Menu
> Intel (R) ME General Settings
> Intel (R) AMT Confi guration
MEBx Exit
[ ] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.