Chapter 7 – DFI DT122-SB Manual User Manual

Page 36

www.dfi .com

Chapter 7 BIOS Setup

Chapter 7

CPU Configuration

This section is used to configure the CPU. It will also display the detected CPU information.

SATA Configuration

This section is used to configure SATA functions.

Enabled for Windows XP
and Linux (OS Optimised
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for Hyper-
Threading Technology)
When disabled only one
thread per enabled core is
enabled.

CPU Confi guration

Intel(R) Pentium(R) CPU G850 @ 2.90GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit

L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache

Active Processor Cores

Intel Virtualization Technology

Advanced

Active Processor Cores

Number of cores to enable in each processor package.

Intel Virtualization Technology

When this field is set to Enabled, the VMM can utilize the additional hardware capabilities

provided by Vanderpool Technology.

206a7
26
2900 MHz
1600 MHz
2900 MHz
2
Not Supported
Supported
Not Supported
Supported

32 kB x 2
32 kB x 2
256 kB x 2
3072 kB

[All]

[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

SATA Mode

IDE Mode

This option configures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode

This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-

face).
RAID Mode

This option allows you to create RAID or Intel Matrix Storage configuration on Serial ATA

devices.

SATA Mode Selection

Determines how SATA controller(s) operate.

Enable or disable SATA
device.

SATA Controller(s)

SATA Mode Selection

Serial ATA Port 0
Software Preserve
Serial ATA Port 1
Software Preserve
Serial ATA Port 4
Software Preserve
Serial ATA Port 5
Software Preserve