Dataprobe 8PK-SCS User Manual
Page 5

Model 8PK-SCS
Page 5
1) Device Labels. This allows changing of the screen labels for the ports and power control outlets.
A) PORT A
B) PORT B
C) PORT C
D) PORT D
E) PORT E
F) PORT F
G) PORT G
H) PORT H
1) SWITCH1
2) SWITCH2
3) SWITCH3
4) SWITCH4
5) SWITCH5
6) SWITCH6
7) SWITCH7
8) SWITCH8
X) Exit
Enter >
Enter the label to be changed. The current label is displayed along with a prompt for the new name.
Type in a new label and then confirm the selection. Labels can be up to 24 characters.
CURRENT LABEL PORT A PORT A
NEW LABEL PORT A > Your New Name
PORT LABEL CHANGED FROM PORT A
TO Your New Name
SAVE CHANGES? (Y/N) >
2) Password The password is used for login to the menu system and in every escape sequence.
The factory default is ‘TEST”. The security code may be 1 to 8 characters. These characters can be
any ASCII character except NULL (00 hex). To change the password, the current password must be
reentered. Then a prompt for a new password, then a confirmation of the new password.
LOGIN > TEST
ENTER NEW PASSWORD > TEST
RE-ENTER NEW PASSWORD > TEST
PASSWORD CHANGED