Dataprobe 8PK-SCS - Manual (Page 3)

Model 8PK-SCS Page 3
Enter the Security Code. Three incorrect attempts to enter the security code will cause the 8PK-SCS to
terminate the call. When the correct code is entered, the Main Menu appears:
8PK-SCS Ver 3.0
1) Port Selection
2) Relay Control
3) Programming
X) Logout
Enter >
1) Port Selection
This selection connects the Master Port to any of the eight ports A through H. This brings up a Port
Selection Menu. Each port can be given a 24 character name. The default names are shown below:
A) PORT A
B) PORT B
C) PORT C
D) PORT D
E) PORT E
F) PORT F
G) PORT G
H) PORT H
X) Exit
Enter Port >
Once a port is selected, the 8PK-SCS will clear the screen and generate the following message:
x Selected (x=the programmed name of the port)
Enter ESC{PASSWORD}ESC to return to menu
At this point the Master Port is connected through to the port selected. The 8PK-SCS is passive to the
messages sent between the Master Port and the port selected. To terminate the session with the
current port and bring back the menu, enter the escape character plus the security code and another
escape character. i.e.
E
s C
TEST
E
s C