Set alarm thresholds – Dataprobe T-APS Rack User Manual
Page 16

Set Alarm Thresholds
Set LCV Threshold (Alarm)
Set Line Code Violation Error Ratio
1E-7 = 1 x 10
-7
5E-6 = 5 x 10
-6
1E-5 = 1 x 10
-5
1E-4 = 1 x 10
-4
1E-3 = 1 x 10
-3
Once the Line Code Violation Error Ratio exceeds the preset threshold value, it will then switch
the ACTIVE PATH to the PROTECTION PATH.
Set LCV Threshold (Cleared)
Set Line Code Violation Alarm Clear Ratio
1E-9 = 1 x 10
-9
1E-8 = 1 x 10
-8
1E-7 = 1 x 10
-7
1E-6 = 1 x 10
-6
1E-5 = 1 x 10
-5
Once the Line Code Violation Clear Ratio achieves the preset threshold value, it will then
switch back from PROTECTION PATH to the ACTIVE PATH.