Dataprobe iPIO-2 Operation Manual - Manual (Page 25)

iPIO-2816_v140120e iPIO-2, iPIO-8, iPIO-16 Users Guide Page 25
10. Firmware Upgrades
The iPIO can be field upgraded. Find the latest version or special purpose versions at
http://dataprobe.com/support.aspx
1) Run the Device Management Utility, available at the link above. If the iPIO you would like to upgrade is not
visible in the list box, either
Select Device | Discover from the menu to locate iPIO units on the local network, or
Select Device | Add from the menu to add the IP address of the iPIO.
Once the device is displayed in the list, highlight it
2) Select Manage | Upgrade Firmware
Enter User Name root and the Password for the Administrator. (default is admin)
Enter the filename of the firmware,
or click Browse and find the file of
the firmware file to be used. iPIO
firmware uses the extension .ipu If
you don’t see any files of that type;
make sure the ‘Files of type’ box is
set for iPIO or All Files.
Click OK when all the details are
entered.
3) The upload will begin, and a
progress bar will be displayed.
4) When
the firmware upload is
completed, WAIT 2 Minutes. The
iPIO will automatically reset and be
ready for use.
Firmware upgrades may or may not reset the iPIO to factory defaults. Check the
releas
e notes on our user’s forum for the upgrade before making changes to you iPIO.