Dataprobe iPIO-2 Operation Manual - Manual (Page 15)

iPIO-2816_v140120e iPIO-2, iPIO-8, iPIO-16 Users Guide Page 15
7. Web Browser Setup
Access to the Setup requires administrator rights.
iPIO setup is divided into seven sections, Device, Network, Email, SNMP, Inputs, Relays, and Remotes.
Click on the buttons on the left to access that section.
Note: Click on Save at the bottom of each screen before moving to another section. Wait for the page
to reload prior to moving to another section.
7.1. Device Setup
Device setup allows definition of
the Location ID, displayed on the
top header of each page. The
Auto Update feature defines if the
status of this device will be
automatically transmitted to the
remote sites, and if so, how often.
Also set on this page are the
Login Names and Passwords for
the User and Administrator roles.
There are two roles that can be
defined. The user has access
only to the status and control
page. The Administrator also has
access to the setup pages.
7.2. Network Setup
The iPIO provides two methods
for setting the IP Address

Static

DHCP
Select Static Mode from the drop
down list and fill in the IP
Address, Subnet Mask and
Gateway as provided by your
network administrator. Click save
to save the changes. You will
then be prompted to reboot the
iPIO. Click on the Reboot
Required button. The iPIO will